Filter By:

  • Show More Brands
  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Parts and Components

Full Parts and Components Catalog Available from Tread Bike Shop

Wolf Tooth Components Set of 4 Chainring Bolts+Nuts For 1x
$20.00
Wolf Tooth designed these bolts to be the best on the market. These optimized single chainring bolts have a 4mm hex socket on the bolt and a 6mm hex socket on the nut...that's right, no more spanner for your single ring bolts! These are 6mm long so they work perfectly with any bolt on single chainring that does not have threaded standoffs. - 6mm length - Made in the US out of 7075 Aluminum Alloy - Has hex heads on both the bolt and nut for easy installation - Max torque of 6-7 Nm with light grease on threads only
Shimano PD-M520 Pedals
$55.00
Shimano's M520s are affordable clipless pedals that are easy to enter and exit, and built to last. They boast dual-sided Shimano SPD bindings, which make them perfect for mountain bikers or roadies who prefer wearing walkable shoes with recessed cleats. The bindings are adjustable for dialing in the perfect entry and exit tension, and they have an open, mud-shedding design that prevents clogging. Chromoly axles and sealed bearings add tons of durability.
SRAM PC-951 9-Speed Chain
$30.00
The PC-951 is SRAM's most economical PowerChain and maintains their high standards of quality. It boasts tough chrome-hardened pins for durability and accurate shifting. And, with its great PowerLink, you don’t even need tools to install it.
Specialized Enduro XL Locking Grips
$25.00
Specialized's Enduro XL Locking Grips boast an oversize diameter for maximum control in even the most challenging situations. Their soft-density, textured outers provide an outstanding grip and superb comfort, while the firm inners and locking clamps built into the ends keep the grips securely in place on your handlebars.
Shimano Dura-Ace 9100 11-Speed Crankset
$600.00
- Optimum Power Transfer - Best Balance For Lighter Weight (-7G) And Efficiency - New Designed Crank Arm - Maintains High Rigidity And Reduces Weight - Hollowglide - 4-Arm Construction Crankset - Adapted For Race Specific Disc Brake System - Shorter Length Of Rear Center With O.L.D. 135mm - Redesign The Gear Teeth Profile To Fit Wider Gear Pitch - 50-34T/53-39T/54-42T/55-42T/52-36T - Iconic Design - Chain Line: 43.5
SRAM MRX Comp Twist Shifter Set
$18.99 - $30.00
SRAM's MRX Comp Twist Shifters are simple to use and offer solid shifting and reliable construction. Shifting one gear or the whole range is simple with just a twist of the wrist. They shift a 2:1 Shimano rear derailleur and a SRAM or Shimano derailleur up front.
SRAM PC-850 8-Speed Chain
$20.00
SRAM's PC-850 Chain makes a trusty partner over hill and dale. It's easy to install, too, thanks to the no-tools-needed PowerLink. Quiet, smooth, reliable and very affordable, the PC-850 is a fine value.
Avid Speed Dial 7 Single Brake Lever
$17.00
Stiff, light and beautiful, Avid's Speed Dial 7 Brake Levers deliver excellent speed control and a great feel for your linear-pull or mechanical-disc brakes. And, they also feature adjustable reach for maximum hand comfort and are made to bend, not break, in the event of a crash. Plus, by turning Avid's Speed Dial knob, you can precisely tune the feel of your brakes any time without tools. This ambidextrous lever can be used as a front or rear lever, too.
Zipp Tangente Cork Brake Pads
$40.00 - $41.00
Zipp's Tangente Cork Brake Pads are perfect for Zipp wheels with carbon braking surfaces. They are made of a composite cork polymer for consistent brake response and to reduce glazing from the intense heat caused by braking on carbon. As a result, the Tangente cork pads avoid the brake pulsation produced by residue buildup from rubber pads and can even eliminate pulsation from rims with previous buildup. These pads have a unique shape with more material in the front to improve durability and shed water. Although the composite material wears similarly to low-temperature rubber compounds, the Tangente cork pads last longer than most rubber carbon-specific pads because of the shape and 0.5 mm greater overall thickness.
Wheels Manufacturing Inc. Aluminum Headset Spacer
$2.00 - $23.00
You have to get that handlebar height just right. It's more comfortable, more efficient, and helps keep your entire upper body healthier. Wheels Manufacturing has your well-being covered with a wide variety of sizes to ensure your bars are right where they need to be. - Spacers are sold individually or in packs of 5 or 10 spacers. Select options from the dropdown menus to display pack size
Wheels Manufacturing Inc. BB/PF30 Universal Adapter for 24mm Spindle Cranks (Shimano, FSA, etc.)
$30.00
Machined engineering-grade Delrin inserts for adapting bottom brackets to a different type of crankset spindle. - Adapts PF30 and Cannondale BB30-73A bottom brackets for use with Hollowtech II cranksets - Delrin adaptors fit between bearings and crank spindle - BB Shell Width (mm): 68 mm , 73 mm - Spindle Interface Type: Hollowtech II - BB/Frame Interface: PF30
Wheels Manufacturing Inc. BB30 Adapter for 22/24mm Spindle Cranks
$30.00
Wheels Manufacturing BB30 Bottom Bracket Adaptor for GXP Cranks adapts 22/24mm Spindle Cranks (SRAM/TruVativ) to work on BB30 frames. Simply tap the adapters into the 6806 bearing in the BB shell, then install the spindle and cranks. Use Wheels Mfg Crank Spindle Spacers to adjust your chainline, or take up any side-to-side movement in your cranks. These spacers are machined from engineering-grade Delrin.
Wheels Manufacturing Inc. BB30 Adapter for 24mm Spindle Cranks
$35.00
Wheels Manufacturing BB30 Bottom Bracket Adaptor for Hollowtech II Cranks adapts 24mm Spindle Cranks (Shimano Hollowtech II, FSA, Race Face EXI, etc.) to work on BB30 frames. Simply tap the adapters into the 6806 bearing in the BB shell, then install the spindle and cranks. Use Wheels Mfg Crank Spindle Spacers to adjust your chainline, or take up any side-to-side movement in your cranks. These spacers are machined from engineering-grade Delrin.
Wheels Manufacturing Inc. BB30 Adapter for Campagnolo Cranks
$60.00
The Wheels Manufacturing BB30 Bottom Bracket Adapter for Campagnolo Ultra- Torque Cranks adapts Campagnolo Ultra-Torque cranks to BB30-standard frames. This adapter fits over the installed crank bearing so no bearing removal is required for installation. This adapter is machined from engineering-grade Delrin. - 48g/pr * The design of these adapters includes the use of the Campy bearings factory installed on the crank spindle.
Wheels Manufacturing Inc. BSA Bottom Bracket Spacer
$4.00
Wheels Manufacturing 2.5mm Black Aluminum Bottom Bracket Spacers are for adjusting chainline or bearing play in English (BSA) or Italian threaded bottom brackets.
Wheels Manufacturing Inc. Derailleur Hanger 100
$30.00

All Wheels Manufacturing hangers are produced in their Colorado shop to exacting tolerances.

  • CNC-machined 6061 aluminum
  • Black anodized finish
  • Mounting hardware included
Wheels Manufacturing Inc. Derailleur Hanger 101
$30.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M4x8 Flat Head Screw
Wheels Manufacturing Inc. Derailleur Hanger 109
$35.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M5x8 Flat Head Screw
Wheels Manufacturing Inc. Derailleur Hanger 11
$30.00

All Wheels Manufacturing hangers are produced in their Colorado shop to exacting tolerances.

  • CNC-machined 6061 aluminum
  • Black anodized finish
  • Mounting hardware included
Wheels Manufacturing Inc. Derailleur Hanger 110
$30.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M3x10 Flat Head Screws
Wheels Manufacturing Inc. Derailleur Hanger 115
$30.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M5x10 Flat Head Screw
Wheels Manufacturing Inc. Derailleur Hanger 120
$30.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M4x8 Flat Head Screws Note: The mounting holes on Wheels Mfg DROPOUT-120 are 18mm apart, center-to-center. Do not confuse this hanger with DROPOUT-138.
Wheels Manufacturing Inc. Derailleur Hanger 13
$30.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M3x10 Socket Head Cap Screws
Wheels Manufacturing Inc. Derailleur Hanger 131
$30.00

All Wheels Manufacturing hangers are produced in their Colorado shop to exacting tolerances.

  • CNC-machined 6061 aluminum
  • Black anodized finish
  • Mounting hardware included
Wheels Manufacturing Inc. Derailleur Hanger 14
$30.00

All Wheels Manufacturing hangers are produced in their Colorado shop to exacting tolerances.

  • CNC-machined 6061 aluminum
  • Black anodized finish
  • Mounting hardware included
Wheels Manufacturing Inc. Derailleur Hanger 144
$30.00

All Wheels Manufacturing hangers are produced in their Colorado shop to exacting tolerances.

  • CNC-machined 6061 aluminum
  • Black anodized finish
  • Mounting hardware included
Wheels Manufacturing Inc. Derailleur Hanger 159
$30.00

All Wheels Manufacturing hangers are produced in their Colorado shop to exacting tolerances.

  • CNC-machined 6061 aluminum
  • Black anodized finish
  • Mounting hardware included
Wheels Manufacturing Inc. Derailleur Hanger 16
$30.00

All Wheels Manufacturing hangers are produced in their Colorado shop to exacting tolerances.

  • CNC-machined 6061 aluminum
  • Black anodized finish
  • Mounting hardware included
Wheels Manufacturing Inc. Derailleur Hanger 162
$30.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M3x10 Socket Head Screws
Wheels Manufacturing Inc. Derailleur Hanger 167
$30.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M3x8 Flat Head Screws
Page 1 of 34 Next page