Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Parts & Accessories
$3.00
Specifically designed for the vulcanization of tube patches, valve patches, and rubber-based tube valve repair units.
$3.50 - $20.00
Stan’s NoTubes Sealant is a thin, low-viscosity liquid that coats the tire interior and seals punctures quickly. Two ounces of Stan's in a tubeless tire can repair punctures up to 1/4" to keep you rolling. Stan's Tire Sealant is formulated to stay liquid in tires for up to seven months. Arid conditions require more frequent monitoring of sealant levels, but anti-freezing agents in our special formula allow Stan's Tire Sealant to be used in temperatures as cold as -30° F. One quart can convert up to 16 tires.
- Suitable for use in tubeless tires and standard tubes
- Designed to seal punctures up to 1/4"
- Stable down to -30 degrees Fahrenheit
- Non-hazardous, non-corrosive, non-toxic
- Contains natural latex
$4.00 - $16.00
Whisky Parts Co. Tubeless Rim Tape.
$5.00
The FlatBoy patch kit will be your best friend when road-/trail-side flat repairs are needed. It features a set of six self-adhesive patches, sandpaper to lightly roughen before applying, and instructions in a snap-shut kit. Patches conform to inner tube perfectly and the kit is compact so you can always find a spot to carry one. Don't leave home without it.
- Easy to apply to your inner tube so your ride can continue on unhindered.
- Glueless patches with no mess.
- Six patches are housed in a small, lightweight container that fits in the smallest places.
$5.00
Our Rim Strips provide the ultimate in protection between the rim and tube for all types of bicycle setups.
- Nylon for maximum strength and effectiveness.
- Conforms to rim profile.
$5.95 - $23.95
- Shim adds support to Presta stem used in a Schrader rim
$7.00 - $27.95
- Repairs punctures up to 1/4 (6mm)
- Optimized for temps down to 15degF (-9.4degC)
- Synthetic later minimizes the risk of allergic reactions
$8.99 - $40.00
A new standard in tubeless sealant.
Finish Line Tubeless Tire Sealant, featuring Fiberlink technology, will not cure inside the tires and doesn’t need to be refreshed every few months to maintain effectiveness. This sealant will last the entire usable life of the tire. Since there is no liquid latex or ammonia in Finish Line sealant, it is naturally non-toxic, hypoallergenic and safe for carbon fiber rims. Additionally, Finish Line Tubeless Tire Sealant cleans up easily with water – no more scrubbing or scraping cured latex from tires and rims.
Fiberlink technology makes this possible. Utilizing DuPont Kevlar fibers, Fiberlink seals are extremely robust once they plug a hole. When a puncture happens, fibers rush into the wound and quickly stop air loss. As the tire flexes while it is ridden, the Fiberlink mesh tightens and reinforces itself, creating a confidence-inspiring seal that will last ride-after-ride.
- Non-latex ammonia-free formulation
- Kevlar reinforced Fiberlink mesh seal
- Seals up to 1/4" punctures
- Can be used in extreme temperatures, down to -10 degrees Fahrenheit
$9.00 - $22.00
Your tubeless wheels will benefit from the use of Orange Seal Tubeless Tire Sealant. It is proven to seal large punctures up to 1/4-inch and perform under varying temperatures and altitudes. Orange Seal Tubeless Tire Sealant is compatible with most bike tire systems and is eco-friendly.
$9.89 - $22.00
Endurance formula lasts twice as long as standard Orange Seal.
- Premium Latex coats the whole casing, from tire bead to tread cap
- Seals punctures up to 1/8-inch, and slices up to 1/2-inch with the use of Nanites
- Developed to add as little weight to a tire as possible
- Made of eco-friendly biodegradable ingredients
$9.90 - $14.99
• External presta valve extensions for deep dish rims
• Machined alloy construction
• Available in 30mm, 50mm, 65mm, and 70mm lengths
$10.00
Laugh in the face of punctures with Muc-Off's super lightweight inner tube sealant! The No Puncture Hassle Inner Tube Sealant is easy-to-install, and the cutting edge molecules seal holes in tubes of up to 4mm, ensuring that your ride is uninterrupted.
- Proprietary water-based non-hazardous formula developed specifically for use with inner tubes
- Compatible with a wide range of tube sizes and bikes - suitable for commuter, folding, urban, touring, MTB and e-bikes
- Works on multiple punctures
- Lasts the life of the inner tube/tire
- Contains cutting-edge molecules to help seal holes quickly and effectively; seals holes in tubes up to 4mm
$10.00 - $153.99
Looking for a super lightweight but badass tubeless sealant? Boom, you've just found it my friend! No Puncture Hassle performs under the most brutal race conditions. The cutting-edge microfiber molecules fill the bigger holes and tears, whilst the advanced latex forms a strong seal instantly. The formula also contains a unique UV detection system that highlights any punctures you haven’t seen during your ride.
Developed with the world's top downhillers and pro peloton teams, to give you the finest tire sealant available. It's non-corrosive and easily washes off with water. Compatible with tubeless ready and full UST wheels/tires, No Puncture Hassle works from 15psi-120psi and temperatures from -20°C to +50°C. Our pouch is designed to fit your Presta valve perfectly and is ideal to add to your toolkit or ride pack for emergency top ups on the go!
- For Downhill, Enduro and Road tires
- Seals tears and holes up to 6mm
- Contains UV puncture detection
- Won't dry out or ball
- Works from 15psi-120psi and temperatures from -20°C to +50°C
- Biodegradable
$10.00
Bigger than standard Presta valve nuts, the Big P-Nut is designed to provide extra leverage to better tighten tubeless valves on standard tubeless rims.
- Over-sized design provides extra torque when tightening
- CNC-machined from AL-6061 aluminum
$10.00 - $26.00
Our new 2Bliss Ready Tire Sealant was custom-designed in partnership with a leading laboratory for tire sealants, and it also underwent extensive real-world testing with our Factory Athletes. What we developed is an innovative, ecological formulation that's the answer to the requirements that riders like you've been demanding. It will immediately seal punctures up to 6mm, whether it be on a road or mountain tire, as well as across global temperatures [-20° to 70°C]. Natural, micro holes in the sidewalls will seal well, and the system is safe for use with latex inner tubes, even inside tubulars. Please note that this sealant is ammonium-, protein-, and latex-free, so it holds no potential for allergic reactions, and there's no risk of it creating damage to bike parts.
- Proven by our Factory Team Athletes.
- Seals punctures up to 6mm.
- Performs in a wide temperature range (-20° – 70°C).
- Works in latex inner tubes inside tubulars.
- Ammonium-, protein-, and latex-free, so there's no risk of allergic reactions or damage to bike parts.
Recommended sealant amount per tire:
- Road: 24-32mm - 30-40ml
- Open Road: 33-50mm - 50-70ml
- MTN: 2.0-2.3" 80-100ml
- MTN: 2.4-3.0" 100-125ml
$10.00
Specialized's Airlock Sealant is the in-tube solution for flat prevention, surpassing the competition in flat protection performance. It's featured here in a personal, 8oz container that's ideal for two standard wheels.
- Non-toxic, non-separating formula doesn't have a limited shelf life like the competition.
- Coats the tube for permanent protection.
- Works with any bicycle tube with a removable valve core.
- Works continuously to prevent slow leaks.
- Completely homogenous, so it doesn't puddle.
- 8oz bottle fills two inner tubes.
- 8oz bottle includes valve puller and hose under cap.
$10.00
Our new RapidAir Tire Sealant was custom-designed in tandem with our new RapidAir tires and Roval wheels to be the fastest tire setup out there.
Through development, we learned that high-pressure, 24-30mm tires require a totally different formula to seal punctures. Our new exclusive mixture not only immediately seals punctures up to 3mm across a large range of temperatures, but unlike other sealants, RapidAir sealant will also keep its seal when you reinflate back to normal riding pressure.
- Compatible with CO2.
- Creates the strongest plug after sealing.
- No damage to bike parts.
- Performs in a wide temperature range (-20° - 70°C).
- Recommended sealant amount per tire: Tire size 24-26mm - 40ml, 28-30mm - 50ml - - - For Maximum performance, use 60ml for any 24-30mm
- Seals instantly with minimal pressure lost.
$12.99 - $66.99
Orange Seal’s rim tape comes in 18mm, 24mm, and 45mm widths fitting most bike rims. The elasticity of the tape allows greater flexibility in fitting different types of rims and form factors.
$14.00
Precision engineered for precise inflation of your Zipp wheels, these Zipp Tangente Valve Extenders take the hassle out of short Presta valves.
- For use with threaded Presta (non-removable core) tubes
- Knurled end to keep pump from slipping
- Available in all lengths to match all Zipp wheels
- 3mm hex broach in the barrel to guarantee a perfect seal when tightened
$15.90 - $30.00
- 2-ply rubber shield fits between tire and tube to prevent flats
- Pair
$17.00 - $18.00
• Integrated presta valve extension
• Machined alloy construction
• Available in 30mm, 50mm, and 70mm
• For use with inner tube with removable Presta valve core
$18.00 - $75.00
- Made of durable light weight polyurethane
- Provides a protective layer between road hazards and the inner tube
- Weighs less than liquid fills and thorn-resistant tubes
- Can be reused
- Easy, mess free installation
$19.99 - $32.35
Prevents thorns and other road debris from puncturing the inner tube and deflating the tire.
- Packaged in a process that avoids the difficult to install "pigtails" traditionally associated with liners
- Equipped with Soft-Tips that prevent friction flats at the overlapping seam
- Sold in pairs
$20.00
Simple and effective design for clean and clog-free sealant injection.
- 2 oz injector with highly bendable top hose and rigid bottom hose
- Valve core tool included (Presta and Schrader valves)
- Compatible with a wide variety of sealants
$20.00
When inserted between the bike tire and tube, KENDA Tube Protectors provide a protective layer between road hazards and the inner tube. The tire and the protector work together to prevent sharp objects from puncturing the inner tube.
- Guaranteed to prevent flats and made in the USA!
- Lightweight - Weighs less than liquid fills and thorn-resistant tubes
- Easy installation - no gooey mess
- Absolutely, positively, will not cause tire or tube to damage or loosen spokes
- Eco-friendly and reusable from bike to bike and biodegradable when disposed
$20.00 - $25.00
- Half the weight of the original Mr. Tuffy Tire Liner
- Rubber shield fits between tire and tube to prevent flats
- Back of the liner is serrated to keep it in place inside the tire and curved to match the profile of the tire
$20.00
Optimized for carbon and aluminum rims, our top shelf tubular glue is a next generation formula. Derived from the most used and proven European recipe that has carried rubber on wheels for the Pro Peloton for decades.
- Perfect for carbon and aluminum rims
- Nitrile gloves in bottom of box to keep your paws clean
- Red in color allows one to know where glue has been applied
- Brush included on lid
- Contains enough to mount 3 wheels
$20.00 - $28.00
The Product that Started a Tubeless Revolution
Inside this simple bottle is a product that changed cycling. Today's tubeless systems rely on the lighter, more reliable, self-sealing performance of Stan's Tire Sealant.
Just two ounces of Stan's in a converted standard tire or tubeless tire can repair punctures up to 1/4-inch almost instantly to keep you rolling. Longer-lasting Stan's Tire Sealant is formulated to stay liquid in tires with even thin casings for up to seven months. Arid conditions require more frequent monitoring of sealant levels, but anti-freezing agents in our special formula allow Stan's Tire Sealant to be used in temperatures as cold as -30° F. One quart will convert up to 16 tires.
- First choice of riders around the world for tubeless conversion and flat prevention
- Seals punctures up to 1/4-inch (6.5mm) quickly
- Stays liquid 2-7 months for long-lasting protection
- Premium low-viscosity formula resists freezing to work in environments as cold as -30° F (-34° C)
- Natural materials, safe for the environment
- Can be injected through valve stems with removable cores compatible with tubes and tubular tires
Page 1 of 2
Next page