The Meteoroid fits all new and older Bern helmets with a two-hole mount located in the rear of the shell. Battery powered. - 10 Lumens - CR2032 battery x2 included - 3 Light Modes (Flash 100 hours, Pulse 30 hours, Steady 20 hours) - Water Resistant - 20 grams - 26mm tall, 39mm wide, 20mm thick (w/o bracket)
The Asteroid fits all new and older Bern helmets with a two-hole mount located in the rear of the shell. USB rechargeable. - 12 Lumens - Micro USB rechargeable - 3 Light Modes (Flash 24 hours, Pulse 6.5 hours, Steady 5.5 hours) - Water Resistant - 16 grams - 26mm tall, 39mm wide, 20mm thick (w/o bracket)
With the push of a button, the 2’Fer can switch between a white 60 lumen front light and a red 20 lumen rear light. Holding the button for 2 seconds turns the light on and off, and pushing the button once changes modes between white solid, red solid, white flashing and red flashing. The light also remembers which mode you were last using and turns on in that mode. - Charging cable included, no tools required - Lithium Polymer battery - Waterproof to IP-65 standard - 3 hour recharge time - 18g / 0.04lb each As Front: - 60 Lumens - Runtime: High 1.5hrs, Flashing 5hrs As Rear: - 20 Lumens - Runtime: High 1.5hrs, Flashing 5hrs
Two really smart, compact USB lights that act as either a front or rear... its a 2Fer. With the push of a button, the 2’Fer can switch between a white 60 lumen front light and a red 20 lumen rear light. Holding the button for 2 seconds turns the light on and off, and pushing the button once changes modes between white solid, red solid, white flashing and red flashing. The light also remembers which mode you were last using and turns on in that mode. - Micro USB charging connection - LED fuel gauge/charge indicator - 180 degree visibility - No tools needed - 1 LiPo battery - 18 Grams
• 5 super-bright LED’s with waterproof silicone lens offer exceptional visibility • 4-hour recharge with nifty USB convenience (cable included) powers light to run up to 46 hours in running mode, up to 27 hours in flashing mode, and up to 15 hours in steady mode • Water-resistant
Optional Accessory Rear rack Bracket for mounting most CatEye Taillights to rear racks with 50/80 mm spaced mounting holes.
Small, compact, quick and easy - there's no reason not to grab a pair of Cateye ORBs for your next ride. The ORB pairs a sleek, compact design housed in an alloy chassis. Conveniently, the lens itself serves as the light’s operating switch and is protected from inadvertent triggers due to the housing’s design while still allowing for side visibility. The ORB is available in front and rear versions and both feature 3 separate operating modes. Installation is quick and easy thanks to the heavy-duty rubber mounting strap and the rear version features an angled mount for seat post use. - Simple, lightweight and compact safety set perfect for kids and adults seeking a little more visibility - Easy installation and push button operation - Universal mounting strap easily attaches to bars from 22mm to 32mm - Side cut outs provide visibility from a wide angle for additional safety - Powered by two CR2032 cells per light
CatEye's Single Shot is the perfect suburban commuter solution. Anyone who rides at night regularly will appreciate this bright rechargeable light. It uses a powerful one-watt LED and a Nickel Metal Hydride (NiMH) battery to fill the road with brightness. And, it runs for over 2 hours on high beam or 24 hours on flashing mode and has a low-battery indicator. This great light comes with a 5-hour trickle charger and includes a no-tools universal mount.
Garmin Varia UT800 Meet the smart headlight that shines brighter for longer - High-intensity cycling headlight for urban and trail use that’s visible in daylight from more than 1 mile (1.6km) away - Projects a steady blast of 800 lumens for up to 1.5 hours - Automatically adjusts to ambient light conditions, speed and ride profile to extend battery life - Works independently or pairs with compatible Edge cycling computers to automatically turn lights on or off, control brightness and more - Offers 5 light modes, including high, medium, low, night flash and day flash Specs: - Dimensions (LxWxH): 3.8" x 1.3" x 1.2" (96.6mm x 33.5mm x 29.7mm); 1.8" with flange (44.7mm with flange) - Weight: 4.6oz (130.0g) - Battery life: 1.5 hours, high; 3.0 hours, medium; 6.0 hours, low; 25.0 hours, day flash; 6.0 hours, night flash - Lumens: 800 - CREE LED: yes - Degrees of visibility: 270 degrees - Visibility distance: 1 mile (1.6km) - Water rating: IPX7
The Plus front bike light is a super-bright, 100% waterproof and versatile USB rechargeable bicycle light. Mount the light to your handlebars or forks, or use the integrated wearable clip to attach the light to your shirt pocket or panniers. More of a runner than a cyclist? No worries. The Plus light also doubles up as a wearable night running light. Just attach the light to your t-shirt, shorts, socks or headband using the smart integrated clip. With an output of 40 lumens and a run time of up to 20 hours in eco flash, the Plus ensures you are well seen to all other cyclists, road users, and trail runners all night long.
The Plus rear bike light is a super-bright, 100% waterproof and versatile USB rechargeable bicycle light. Mount the light to your seatpost, seat stays, and pannier racks, or use the integrated wearable clip to attach the light to your t-shirt or backpack. More of a runner than a cyclist? No worries. The Plus light also doubles up as a wearable night running light. Just attach the light to your t-shirt, shorts, socks, or headband using the smart integrated clip. With an output of 20 lumens and a run time of up to 40 hours in eco flash, the Plus ensures you are well seen to all other cyclists, road users, and trail runners all night long.
Setup your Light & Motion Urban or Deckhand light (sold separately) wherever you can connect a GoPro mount. Use this adapter to connect your Urban or Deckhand to any GoPro mounting option.
Light & Motion's Vis 180 Aero Post Pad lets you easily attach your Vis 180 taillight to the back of your aero seatpost so you can be fast and visible.
Strap Light & Motion's Vis 360 Spare Rear Mount to your spare helmet and use your Vis 360 light no matter what lid you are wearing.
This mount is designed to securely attach your Light and Motion Seca, Vega, or Stella headlight (sold separately) to your helmet. With a helmet mount, the light is always pointing where you're looking.
All of our head light mounts deliver rock solid mounting but for those that demand the most rigid set up, the NiteRider Lumina Handlebar Clamp Mount is here to deliver a high degree of performance and stability. Fits a max bar diameter of 35mm. SYSTEM COMPATIBILITY - Lumina Series - MiNewt Cordless Series - Mako Series WARRANTY - This NiteRider accessory is backed by NiteRider’s lifetime warranty that covers any defects in mechanical components (housings, covers, mounts and fasteners)
Origin-8's Eyelet Stub Light Mount is an ingenious way to easily mount a light (or other accessory) to any bicycle frame with standard rack/fender eyelets. The Stub is made of light and tough 6061 aluminum tubing with an outside diameter of 26mm and an overall length of 46mm. It simply bolts to the eyelet with its included 5mm screw. There's a press-fit cap on the end to seal it.
Origin-8's Front Light Bar boasts a whopping 100 lumens of LED-driven brilliance for great visibility. You'll get 6 modes (3 steady, 3 flashing) and a 2-6 hour run time. Charge up the LiPo rechargeable battery with a USB hookup and you'll be set to roll.
Origin-8's Rear Light Bar boasts 35 lumens of LED-driven brilliance for great visibility. You'll get 6 modes (4 steady, 2 flashing) and a 2-5 hour run time. Charge up the LiPo rechargeable battery with a USB hookup and you'll be set to roll.
- Attaches to rear racks - Compatible with: Blinky 3,5,7 and Superflash - 25mm between each of the top horizontal holes (center to center) - Requires an "L bracket" that typically comes with a rear rack. If your rack is missing the L bracket, you can purchase Planet Bike's rack hardware pack
- Fits 25.4-31.8mm handlebars - Compatible with Blaze, Beamers, 1200, 5000x and Super Spot
- Compatible with seatpost diameter 20mm-36mm - Adjustable light angle - Easy on/easy off design makes for quick mounting and removal - Compatible with Blinky 3,5,7, Superflashes, Turbo, Turbo Minis, Superflash Micros and Blinky Safety rear light
Planet Bike's Beamer 3 Headlight boasts 3 super-bright white Nichia eXtreme LEDs with steady and flashing modes to provide excellent visibility. And, the soft-touch switch makes it easy to change settings, even with gloves on. The Beamer also features a quick-release handlebar mount that attaches in seconds without tools. Plus, the included 2 AA batteries deliver run times of up to 100 hours.
Maximize your visibility with this amazing taillight. The SuperFlash aims 2 extreme LEDs plus a half-watt Blaze LED for light that can be seen for up to 1 mile! The ultra-compact case is weatherproof, light and durable. And, the SuperFlash includes a bike mount and clip mount for multiple mounting options. Plus, the 2 AAA batteries (included) offer run times up to 100 hours.
Planet Bike's Superflash USB uses super bright LED's for visibility up to 1 mile. The ultra-compact case is weatherproof, light and durable, and features a soft-touch power switch. A USB-rechargeable lithium ion battery provides up to 36 hours of run time.
Light your way and be seen with Sigma's Eloy headlight. It has four super bright white LEDs, is visible from the side, and sports a long run time of up to 100 hours. You can choose between steady and flashing modes with a convenient click switch. And, lightning-quick installs are assured thanks to the tool-free Click & Go bracket. Plus, batteries are included.
Sigma's Tail Guard Taillight sports 5 LED's of brilliant light that is visible from up to a mile away. This little powerhouse has a run time of up to 150 hours on just 2 AAA batteries (included)! Its lights are in a line to give a wide beam in all four modes (steady, flashing slowly, rotating, and flashing quickly) for extra safety.
You really can put a Specialized Stix headlight almost anywhere. This headlight mount is designed to cleanly integrate into the headset of the bike and maintain a clean look with the Stix positioned just under the stem. - Positions Stix headlight just under the stem in front of the head tube for a super-clean, integrated look. - Interlocking system between plastic mount and aluminum spacer allows the light and mount to quickly be removed from the bike. - Works with 1-1/8th Aheadset-style headsets and custom 10mm thickness spacer.
Easily mount the Specialized Stix to your helmet with this Stix Helmet Strap mount that attaches securely through your helmet's vents. - Allows Stix light to be mounted horizontally or vertically. - Includes hook-and-loop strap to securely mount to helmet through vents.
Mounts a Specialized Stix light to a CPSC, DIN standard reflector/rack bracket or the Specialized Pizza Rack. - Vertical CPSC hole pattern. - This mount can attach to the Horizontal Din hole pattern. - Specialized single hole pattern for the Pizza Rack. - Mounts Stix light horizontally. - Includes all mounting hardware.
Page 1 of 2 Next page