Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Model Years
  • Show Fewer Model Years

Lighting

$20.00
Problem Solvers' Braze-on Light mount threads into your fork or fender eyelets, allowing you to mount lights or accessories. It's lower position is great for getting your light closer to the ground for better visibility.
$4.00
- Attaches to rear racks - Compatible with: Blinky 3,5,7 and Superflash - 25mm between each of the top horizontal holes (center to center) - Requires an "L bracket" that typically comes with a rear rack. If your rack is missing the L bracket, you can purchase Planet Bike's rack hardware pack
$5.00
- Fits 25.4-31.8mm handlebars - Compatible with Blaze, Beamers, 1200, 5000x and Super Spot
$6.00
- Compatible with Blinky 3,5,7, Superflashes, Turbo, Turbo Minis Superflash Micros and Blinky Safety rear light - Designed specifically for aero seat posts - Adjustable light angle - Easy on/easy off design makes for quick mounting and removal
$7.00
- Compatible with seatpost diameter 20mm-36mm - Adjustable light angle - Easy on/easy off design makes for quick mounting and removal - Compatible with Blinky 3,5,7, Superflashes, Turbo, Turbo Minis, Superflash Micros and Blinky Safety rear light
$20.00
Stand out at night! The Blinky 3H combines 3 bright LEDs with a parabolic reflector for up to a mile of visibility. And, its self-leveling helmet mount ensures optimum visibility as you ride. It also includes seatpost and seatstay mounts. The Blinky 3H has steady and flashing modes and runs for up to 100 hours on the included AAA battery. Also, this light includes a reflective lens and side reflective strips for extra safety.
$5.00
Grab a set of Portland Design Works tail light brackets to mount your lights on seat posts and seat stays. - Seat post and seat stay brackets - Rubber shims included for a custom fit - Compatible with all PDW tail lights except Asteroid and Fenderbot
$5.00
Mount your tail light to the reflector tab on the back of a rear cargo rack with this Rack Bracket from Portland Design Works. - Compatible with all PDW rear lights except the Asteroid and Fenderbot - Horizontal holes are 50mm apart to fit European rack standards - Vertical holes are 18mm apart to fit most reflector mounts
$15.00
The PDW Outpost Mount allows you to attach a handlebar-mounted headlight to the side of your tapered wire basket—eliminating the problem of basket cargo blocking the light beam. The attachment plate compensates for the angle of a tapered wire basket, allowing the headlight to stay nice and level. - 32mm diameter clamping area for lights - Attaches with two M5 bolts and a steel backing plate - Mounts on left or right side
$30.00
The PDW Kepler eBike Tail Light offers up 220 degrees of visibility. Compatible with any 6V-15V system, this light has 3 super-bright red LED's. Equipped with a pre-installed Bosch plug, the Kepler eBike Tail Light is ready to plug directly into any Bosch eBike system. The Bosch plug can also easily be clipped off for direct wiring into other eBike systems. - Seatpost or seatstay mounting - 220 degrees of visibility - 25 Lumens - 48" cable length - Remove Bosch plug to work with any 6V-15V e-bike system
$11.89
Origin-8's Eyelet Stub Light Mount is an ingenious way to easily mount a light (or other accessory) to any bicycle frame with standard rack/fender eyelets. The Stub is made of light and tough 6061 aluminum tubing with an outside diameter of 26mm and an overall length of 46mm. It simply bolts to the eyelet with its included 5mm screw. There's a press-fit cap on the end to seal it.
$45.00
Origin-8's Front Light Bar boasts a whopping 100 lumens of LED-driven brilliance for great visibility. You'll get 6 modes (3 steady, 3 flashing) and a 2-6 hour run time. Charge up the LiPo rechargeable battery with a USB hookup and you'll be set to roll.
$45.00
Origin-8's Rear Light Bar boasts 35 lumens of LED-driven brilliance for great visibility. You'll get 6 modes (4 steady, 2 flashing) and a 2-5 hour run time. Charge up the LiPo rechargeable battery with a USB hookup and you'll be set to roll.
$10.00
The NiteRider Adjustable Angle Tail Light Strap Mount was specifically designed for our flagship tail light, the Sentinel. It allows you to fine-tune the mounting angle of the light to display the projected Laser Lanes even and parallel on the ground. It's an easy on and off non-slip tail light mount that also features a grooved contact pad that makes this the 'go to' mount for riders using aero seat posts. System Compatibility - Sentinel - Solas - Sabre - CherryBomb
$10.00
If you're looking to mount your Lumina and Mako series lights to a GO Action Camera style mounting point, this is the accessory you've been looking for. The mounting point screws into the GO Action Camera style connection for a solid and secure fitment. System Compatibility - Lumina Series - Mako Series
$13.99
All of our head light mounts deliver rock solid mounting but for those that demand the most rigid set up, the NiteRider Lumina Handlebar Clamp Mount is here to deliver a high degree of performance and stability. Fits a max bar diameter of 35mm. SYSTEM COMPATIBILITY - Lumina Series - MiNewt Cordless Series - Mako Series WARRANTY - This NiteRider accessory is backed by NiteRider’s lifetime warranty that covers any defects in mechanical components (housings, covers, mounts and fasteners)
$20.00
Increase your line of sight with the NiteRider Lumina Helmet Mount. By mounting your head light onto your helmet, it’ll allow you to see farther into your turn or wherever your head turns. System Compatibility: - Lumina Series - MiNewt Mini Series - Mako Series
$20.00
Helmet mount for all systems that use the slider mounting clip. Not compatible with Lumina Series Lights. System Compatibility - Pro Series - HID Series - Classic Plus & Select - Evolution & Digital Evolution - HeadTrip & Digital HeadTrip - TrailRat & TrailRat Select - RoadRat - Digital Patrol LED - Digital Patrol - Pre 2001 systems
$30.00
The NiteRider Swift 300 delivers everyday reliable performance in an economical ultra compact head light. Sporting features like an easy on and off handlebar strap mount, low battery indicator and to top it off, it's USB Rechargeable; making it the perfect light of choice for commuters and cycling enthusiasts. Although small in size, make no mistake; the Swift 300 packs a big punch with a maximum light output of 300 lumens! Powered by an internal Lithium Ion battery, in Walk Mode, the Swift 300 can run for up to twenty-seven hours before it needs a charge. - Highly durable design made with fiberglass reinforced plastic - Smooth 300 lumen beam pattern in an ultra compact and lightweight design - Innovative Collimator Lens – optimizes your field of view - Built-in, easy on and off handlebar strap mount - 4 Light Levels plus 1 Daylight Flash Mode - Fuel Gauge / Battery Level Indicator - FL1 Standard IP64, dust and water-resistant - Convenient USB rechargeable WARRANTY - The Swift 300 is backed by NiteRider's lifetime warranty that covers any defects in material and workmanship, mechanical components (housings, covers, mounts and fasteners) and LEDs. SYSTEM INCLUDES - LED Light Head - Internal Li-Ion Battery - Build-in, Handlebar Mount - USB Charging Cable
$125.00
The NiteRider Lumina 1200 Boost provides enough light that it can be used in just about all riding conditions, whether it be on the road, on your favorite mountain biking trail, or hand-held in Walk Mode. Specifically designed to meet the needs of riders in all cycling categories, the Lumina 1200 Boost features the Boost Mode light setting. Simply double click the power button, giving you the option to operate your light at maximum light output! And utilizing a CREE LED at 6000k, means you'll get what most consider to be the best LEDs available on the market today. These high performance LEDs are extremely reliable, with no filament to break or burn out. With the all new custom engineered collimator optics, the Lumina 1200 Boost projects a beam pattern that provides a generous widespread and even beam pattern of 1200 brilliant lumens! The high-strength head light body casing is comprised of lightweight aluminum and Dupont Fiberglass reinforced nylon that is highly durable. - All New Collimator Lens, distributes a generous even widespread beam pattern - Boost Mode, double tap power button to unleash maximum LED output at 1200 lumens! - 5 Light Levels plus 1 Daylight Flash Mode - FL1 Standard IP64, dust and water-resistant - Secure on and off-road capable handlebar mount - Fits standard and oversize 35mm handlebars - Perfect for helmet mounting (Helmet Mount sold separately) - IntelliCharge – Reduce charge time in half! - Convenient USB rechargeable - Low battery indicator - Lock Mode, perfect for use during storage and transporting the light. Press and hold power button for 7 seconds to lock out operation of light. WARRANTY -The Lumina 1200 Boost is backed by NiteRider's lifetime warranty that covers any defects in material and workmanship, mechanical components (housings, covers, mounts and fasteners) and LEDs. SYSTEM INCLUDES - LED Light Head - Internal Li-Ion Battery - Handlebar Mount fits up to 35mm - USB Charging Cable
$170.00
Epro 1000 is NiteRider's first headlight specifically made for electric bikes. It comes with pre-wired power line for connection to the eBike's battery. Power line cable measures approximately 52" in length. Headlamp powers on with ignition switch. Features two modes-Steady ON and Pulse Flash-with Built-in Mode Memory (remembers last setting). FEATURES - Lumen Output: 1000 - 2 Modes - Hardwired, Voltage 12 to 40 Volts 1.2 amps at 12v, 300mA at 40 volts - Water / Dust Resistant IP64 Rated - Weight: 166 grams - Fits 22mm-31.8mm seat posts - Includes a pre-wired Epro 1000 Head Light, Handlebar Clamp Mount, and Rubber Mounting Shims LIGHT MODES 1) Steady ON 2) Pulse Flash NiteRider recommends this headlight be installed by an authorized e-bike service and repair shop. Please reference your bike manufacturers manual for compatibility. Not compatible with 6 Volt systems.
$16.00
This lightweight bicycle handlebar and accessory mount adapter allows for the perfect placement of your mirror, bell or light. Lightweight and sleek design prevents your handlebar from becoming too cluttered. - Made from hi-tech resin and aluminum alloy - Lightweight accessory holder for handlebar end - Ideally paired with a bell, light or mirror - Works with both road and MTB bars - Minimalist design that does not clutter your bike
$13.00
These handy little handlebar accessories are activated by your bike's motion, so they're ready to go whenever you are! - Motion-activated lights - One LED per plug - Mounts easily into standard (17.5–19mm internal diameter) handlebars
$10.00
Set up a light wherever you can connect a GoPro mount. Use this adapter to connect your Imjin or Nip to any GoPro mounting option.
$10.00
Setup your Light & Motion Urban or Deckhand light (sold separately) wherever you can connect a GoPro mount. Use this adapter to connect your Urban or Deckhand to any GoPro mounting option.
$10.00
Light & Motion's Vis 180 Aero Post Pad lets you easily attach your Vis 180 taillight to the back of your aero seatpost so you can be fast and visible.
$10.00
Strap Light & Motion's Vis 360 Spare Rear Mount to your spare helmet and use your Vis 360 light no matter what lid you are wearing.
$13.00
This mount is designed to securely attach your Light and Motion Seca, Vega, or Stella headlight (sold separately) to your helmet. With a helmet mount, the light is always pointing where you're looking.
$40.00
The future of cycling taillights is here. Vya is a game-changing design, blending powerful output with revolutionary smart features. The piercing 50 lumen output is easily visible over a distance of 1km, even in bright daylight. What separates Vya from traditional taillights are smart auto-on/off sensors – start riding and the light turns on automatically and will shut itself off after the ride, with a delay built in for stoplights. The scientifically designed SafePulse beam pattern not only gets noticed from motorists, but allows the driver to accurately judge distance from the rider and their direction of travel – a safety feature not possible with strobing lights. Attaching Vya is effortless with a simple clockwise 1/4 turn into the mount locking the light in place and activating the auto-on feature. When it comes time to recharge, remove Vya from the mount in seconds and insert the integrated USB paddle directly into a computer or USB power outlet – no cables keeps recharging simple and convenient. The next evolution in bike safety, Vya takes powerful safety lighting and keeps the rider safe so they can focus on the road ahead. Features - 50 Lumen Output certified to the FL-1 Standard with high powered premium CREE LED - Smart sensor technology senses motion and automatically turns Vya on when inserted into mount and will remain on, even when a rider pauses at stoplights - Auto-off when bike is parked or light is removed from mount to prevent the dreaded ‘dead bike light’ when it comes time for the next ride - SafePulse beam pattern scientifically designed to enhance a passing driver’s ability to judge the cyclist’s distance and direction of travel without the risks associated with flashing lights - Beam pattern optimized to give a wide red swath of light that can be seen clearly from the rear and side ideal for city riding - An impressive 8 hour runtime allows Vya to be used on multiple rides before needing a recharge, low battery status is indicated by rapidly flashing sidelights - Ultra-compact mount with durable rubber strap designed to be compatible with various size seat posts and can even be attached to seat stays - USB Mount Receptor allows light to be securely mounted or removed from bike in seconds with a simple, secure 1/4 turn lock; light will not turn on when removed from mount - Direct USB charging without cables fully charges in 2 hours - Made with bio-renewable material waterproof to 1 meter (when inserted in mount) for all-conditions reliability (IP67 Rated) Specifications - Lumens: 50 (SafePulse) - Runtime: 480 min (SafePulse) - Beam Angle: 30° (flood) - Charge Time: 120 min
$55.00
The perfect bike headlight for city riders that want premium features with an entry-level price. High visibility is prioritized and the platform has dedicated amber sidelights that are distinct and easily recognizable by drivers, especially through intersections. City riders will appreciate the exclusive SafePulse beam, scientifically designed to provide the highest level of rider awareness without the risks associated with flashing lights. Easily mount on standard or oversize handlebars with a mount that provides enhanced grip and features quick release technology to remove in seconds. Reliable construction is unmatched in the market and exceeds the needs of daily riders. This is the only waterproof lighting platform with a certified IP67 rating—meaning the light is certified to withstand water immersion up to a depth of 1 meter. Commute with the added assurance knowing rain or shine the light will keep performing. Recharging is fast and efficient with the included Micro USB cable. All the innovative safety features of the premium Vis Lights with a value-based price, Vis 500 is the leader in its class. Key Features - 500 Lumen Output certified to the FL-1 Standard with high powered premium CREE LED - Visibility is enhanced with bright amber side lighting providing maximum safety through intersections and high-traffic areas - Daylight visible pulse mode keeps cyclist safe without the inherent dangers of flashing lights - Micro-peened reflector optimizes the beam pattern for road riders providing a smooth, even spot beam void of distracting hard edges - Multiple power settings to achieve long runtimes for extended rides - Multi-color battery indicator is driven by custom firmware to provide accurate battery status throughout entire runtime - Mounting is simple and effective with ultra-grippy rubber ensuring light doesn't slip on regular or oversize handlebars - Quick release allows the removal of the light in seconds while leaving the base mount on the handlebar - Waterproof design eliminates the leading cause of bike light failure - water immersion - Charging is reliable and simple with included Micro USB cable Tech Specs - Lumens: 500 (high), 250 (medium), 125 (low), 125 (pulse) - Runtime (minutes): 90 (high), 180 (medium), 360 (low), 720 (pulse) - Beam Angle: 20° (Spot) - Charge Time: 270 min - Fast Charge: No - IP Rating (FL-1): 67 - Depth Rating (FL-1): 1 meter(s) - Impact Resistance (FL-1): 1 meter - Product Weight: 121 grams - Product Dimensions: 1.2" x 1.2" x 4" - Compatible Mounts: Bar, GoPro, Helmet