Tools

A professional quality shop chain tool that works on 5-speed to 12-speed Road and Mountain Bike derailleur chains*, including SRAM AXS 12 speed, as well as 1/8-inch and 3/16-inch chains. The CT-3.3 features an adjustable locating shelf so it works on any width chain to remove and install chain rivets. Built to last and easy to use, the CT-3.3 features a comfortable handle, investment cast steel body and replaceable driving pin (#CTP). *The CT-3.3 will install, but not peen, Campagnolo 11 and 12-speed chain rivets. - Comfortable T-handle - Replaceable driving pin (CTP) - Investment cast steel body - Adjustable locating shelf

The Finish Line Absorb-It Mat is the perfect way to keep any work area clean. Designed with special absorption fiber technology, the Absorb-It Mat absorbs and traps chain lubricants, cleaners, degreasers, brake fluid and hydraulic oils. The combination of absorption fibers and a leak-proof poly liner make the Absorb-It Mat perfect accessory when degreasing & lubricating bicycle chains. Use the Absorb-It on a work bench, under an automobile to catch leaking fluids, in a car trunk to prevent stains, in a chemical storage cabinets, or under a trainer to catch perspiration. The Absorb-It Mat comes in two different sizes: Small (48" X 18") and Large (60" X 36"). The 48" x 18" will absorb and trap up to 11L of fluids. The larger 60" x 36" will absorb and trap up to 2.5L of fluid. Both mats can be cut with a scissor to fit in custom areas.

Built to withstand the punishment of travel and constant use and molded from impact resistant polypropylene, the BX-3 features pallets with 70% more surface area than the BX-2.2. Easily transportable with the integrated wheels and extendable handle, this case was designed with the help of some of the world's best mechanics for optimal form, function and longevity. - Smooth rolling integrated wheels - Extendable handle - Dust and water resistant - Air pressure compensation valve - Custom designed tool-holding pallets with loops and pockets - Gas assisted lid struts for easy opening - Dual-sided upper and mid level folding pallet wings - Front tool pallet that stores safely inside during transport - Nominal dimensions: 23.4" x 17.3" x 9.3" (59.5 cm x 44 cm x 23.5 cm), 21.6 lbs. (9.8 kg)

- For use with majority of Hex bolts found on a bicycle - 4, 5, 6mm Hex

Precision CNC machined dual-sided aluminum tool for the installation and removal of 12- and 36-notch external bearing bottom brackets. Anodized for easy identification and featuring a ratchet/torque wrench compatible 3/8-inch drive. Fits Praxis M30 and M35 - M30: 12-notch 48mm OD cup - M35: 36-notch 51.7mm OD cup

Confident braking means you can go faster. Enough said. SRAM's Disc Brake Bleed Kit is compatible with SRAM XO, XX, Guide, and HydroR brakes. It is not compatible with RockShox' fork bleed kit. Includes the following: - 2 syringes/fittings - Bleed blocks - Torx tool - Crow's foot - Bleeding Edge Fitting

Shimano Genuine disc brake bleed Funnel unit for ST type Road brake lever (M7 thread bleed port) Features: - Oil spill guard lid with an integrated oil stopper holder - Funnel base - Bleeding instructions available for download under 'Documents & Links' below

A complete tool set to work on both Campagnolo and Fulcrum Ultra-Torque and Power Torque crank and bottom bracket systems (each sold separately). The CBP-8 includes a beefed-up bearing and crank puller and all the fittings necessary to remove and install both systems. - Bearing Puller That Fits Both Power Torque And Ultra-Torque - Crank Puller For Power Torque - Bearing Setter For Both Power Torque And Ultra-Torque - Removal Adaptor For Power Torque Crank Bearings - Removal Protection Pads For Use With Carbon Cranks - Removal Protection Adaptor For Use With Aluminum Crank Arms - Crank Removal Extension Plug For Power Torque

Park's Crank Puller is for removing crankarms on Shimano's splined, oversize, pipe-billet bottom brackets. It employs a long handle and a fine thread for the leverage and torque needed to remove tight arms. Park's unique rotating tip ensures smooth operation and long life. (The CCP-44 does not fit standard square or tapered bottom brackets.)

Choose the perfect tool for the job with Park's P-Handled Hex Wrenches. These top-shelf Allen wrenches come with offset handles made from durable nylon in a comfortable, ergonomic design. They are made of chrome vanadium for exceptional durability. The long shafts feature Bondhus heads for accessing hard-to-reach bolts and the short ends are chamfered for extra grip and high-torque applications.

• Lightweight reinforced nylon construction • Smooth edges won't scratch rims or pinch tubes • Storage clip features built-in abrasive surface

- Machined to match manufacturer specifications and designed to be used with a ½” drive socket or torque wrench for easy installation and removal of e-bike lockrings. - Precision machined aluminum body. - Anodized in Wheels MFG red.

Precision CNC machined aluminum tool for the installation and removal of 16-notch external bearing bottom brackets. Featuring updated tooth profiles to optimize the fit between the tool and high performance BB parts. Anodized and laser engraved for easy identification and featuring a ratchet/torque wrench compatible 3/8-inch drive. - 16 notch 44mm OD cups - Fits Shimano BB80, BB5700, XT BB70, BB51, and previous external bearing threaded cups - Also fits many external threaded types for Campagnolo, Chris King, FSA MegaExo, Hope, SRAM/Truvativ GXP, Race Face X-type, Surly, Wheels, Fulcrum, and others - Fits 16 notch rotor disc lockrings

- For installing DUB BSA bottom brackets - Compatible with a 3/8-inch drive torque wrench so you can torque to spec

A precision CNC-machined aluminum tool for the installation and removal of select threaded bottom brackets with 16-notch tool fittings, including Shimano XTR BB93, Dura-Ace BB9000, and Token bottom brackets. Manufactured in-house by Park Tool, anodized for easy identification and featuring a ratchet/torque wrench-compatible 3/8" drive. The BBT-49.3 features integrated threads for full compatibility with the Park Tool BBT-RS Bottom Bracket Tool Retaining System (sold separately). The BBT-RS uses an adjustable spring-based tension system to apply consistent, adjustable pressure to the tool, ensuring full engagement with the tool fitting and preventing slippage. Fits 16-notch threaded bottom bracket tool fittings with a major diameter (outside of notches) of 39-40 mm and a minor diameter (inside of notches) of 37.6 mm, including: - Shimano XTR BB93 - Shimano Dura-Ace BB9000 - Token Also fits chainring lockrings on Shimano STEPS square spindle e-bike systems including: - E6000 - E6002 - E6050 - Replacement for Shimano TL-FC38 tool - 3/8" drive fitting

Elite Bleed Kits feature premium syringes and components designed for the professional mechanic. - Premium syringes offer enhanced clarity, improved durability, and ergonomic handles - Innovative quarter-turn valves make it easy to quickly open and close the bleed system - Straight and 90-degree clips keep the syringe upright to lend an extra hand to the technician - Includes bleed blocks for most popular 2-piston and 4-piston brake calipers - Includes adapter fittings for compatibility with Shimano, Magura, Tektro, TRP, and Hayes disc brakes - Deluxe case keeps small parts organized and protected - Red seals provide easy identification for use with mineral oil systems only

Park's Freewheel Remover Wrench provides superior leverage for freewheel removal and installation. Its head slides over Park freewheel removers and features a locking knob for a secure fit.

Elite Bleed Kits feature premium syringes and components designed for the professional mechanic. - Premium syringes offer enhanced clarity, improved durability, and ergonomic handles - Innovative quarter-turn valves make it easy to quickly open and close the bleed system - Straight and 90-degree clips keep the syringe upright to lend an extra hand to the technician - Includes bleed blocks for most popular 2-piston and 4-piston brake calipers - Includes adapter fittings for compatibility with SRAM, Avid, Formula, Hayes, and Hope disc brakes - Deluxe case keeps small parts organized and protected - Black seals provide easy identification for use with DOT fluid systems only

Origin-8's Universal Bleed kit comes with just about everything you would need to tune your hydraulic disc brakes back to perfection. It features two 20ml syringes, three tubes, two 5mm adapters, one 6mm adapter and two hose clamps. Hydraulic fluid is not included.

- Alloy body with chrome plated tools - Hex 2 / 2.5 / 3 / 4 / 5 / 6 / 8mm - PH2 screwdriver - Torx 10 / 25 - Chaintool - Spoke wrench 3.6 / 3.75 / 4.0 / 4.4mm

Park's Shop Cone Wrenches are made of durable tool steel and are thin to fit the low-clearance adjusting nuts and cone flats on hubs and other bearing assemblies. Park's special Y-heads put more material where it's needed for excellent durability and holding power. The 26mm size fits through-axle end caps and suspension fork crowns. Most applications require at least 2 cone wrenches. Call or stop by. We can recommend the correct sizes for your needs.

- New design with dual 15mm openings and 24mm socket driver. - Features extra long 350mm length and dice grip handle. - Designed to stand up to the harsh conditions of professional use. - Improved ergonomics makes pedal removal easier. A quality pedal wrench is worth its weight in gold. The new and improved Pedro's Equalizer Pedal Wrench II makes quick work of even the toughest pedals and now doubles as a socket driver wrench for use with Pedro's professional socket tools. Features include an extra long, 350mm length, tubular handle with dice grip for control and comfort, heat-treated chrome-moly steel construction for the ultimate strength and lasting performance, new 24mm socket driver, and new dual precision cut 15mm wrench openings positioned at 30 and 75 degree offsets for optimal mechanical advantage and wrench positioning. Backed by Pedro's lifetime warranty.

Once you try on Park's Heavy Duty Shop Apron, there's no going back to standard aprons. The SA-3 is made from heavy 10-ounce cotton canvas and has two rows of bar tack reinforced pockets for stashing pens, parts, tools, etc. The special crossback design removes pressure from the neck for all day comfort and a nylon quick release makes the apron easy to adjust and take off. This sweet apron is a full 35-inches in length and the bottom 7-inches of the apron can be snapped up for a custom height fit. Plus, an embroidered Park Tool logo makes the apron as good looking (even when it's dirty) as it is functional.

Park Tool's Shop Scissors are shop quality with sturdy, stainless steel blades and a dual-density grip. They're perfect for a wide range of mechanic's duties including cutting zip-ties, boxes, bar tape, and handle grips.

Forged and machined, the ZP-5 is ideal for closely cutting zip ties and many other materials in tight spaces.

The CC-4 is a drop-in style gauge that measures bicycle chain wear. The laser cut CC-4 accurately measures a long section of chain and strategically comes in contact with the chain in three places, quickly and easily taking the guesswork out of knowing when chain replacement is necessary. A worn chain will cause poor shifting as well as accelerate drivetrain wear. The tool works on any 5 to 12-speed derailleur chain (including SRAM AXS) and is designed to accurately indicate when a chain reaches .5% and .75% wear, the points at which most chain manufacturers suggest replacement.

• Precision-sized, hardened-steel, chrome-plated spoke wrench • Deep U-channels for a great grip • 8-groove design fits 9/10/11/12/13/14/15 gauge spokes/nipples • Made in Taiwan

Made from tough steel and reinforced with extra material at the highly stressed wrench openings, Park’s shop-quality Pedal Wrench is built to easily install and remove pedals, and to last and last. It has 15mm and 9/16-inch precision openings to fit all pedals. And it boasts a long, round, vinyl-coated handle that won’t dig into your hand and provides optimum leverage. There's even a hole in the end of the wrench for hanging it on your toolboard.

- 2 tools in one: Chain Whip/Pedal Wrench - Sprocket remover chain whip with built in lockring spanner - Rubber-coated non-slip handle

Cleans bicycle chain quickly, easily, and effectively — without the hassle and mess of removing the chain from the bike. The Cyclone uses a large solvent reservoir, hundreds of rotating bristles, and a two-step cleaning process to get chains really clean, improve shifting performance, and extend the life of the chain and other expensive drivetrain parts. - Works with all multi-speed bikes (5, 6, 7, 8, 9, 10, 11, and 12-speed) as well as some single-speed models and e-bikes - Strong magnet at the bottom of the fluid reservoir holds metallic particles scrubbed from the chain - Special wicking sponge draws solvent from the chain as it exits, minimizing drips and mess - Sturdy handle makes the Cyclone easy to use and control - Holds 2 fluid ounces (59ml) of solvent

Park's Valve Core Tool is great for tightening, removing and installing Schrader and Presta valve cores (the cores are inside the valve), and also Presta valve extenders that have 5mm wrench flats. It's a handy tool to save a tube when all that's wrong is a broken valve, and it also lets you remove valves to easily insert sealant.

Fix it fast. Fits perfectly in your Scalpel Stash kit or a pocket, and contains ten hand-picked tools that assist in all but the least common bike adjustments. Where it thrives: On the bike, challenging trails, the open road What it's built for: Fixing, durability Highlights: - Contains: Hex Keys 2 | 2.5 | 3 | 4 | 5 | 6 | 8mm | Torx T25 | Phillips #2 | Valve Core Tool - Hardened tools with an anti-corrosive coating and robust aluminum side bars - Compatible with 2021+ Scalpel STASH Kit

Onboard mechanic. For rapid repairs, the STASH system holds a quick-draw Cannondale 10-in-1 mini tool, CO2 inflator spacer and tire plug kit beneath the water bottle. Where it thrives: On the bike, challenging trails What it's built for: Versatility, convenience Highlights: - Fastest access to tools during riding or racing - Compatible with 2021+ Scalpel - Includes holder, Dynaplug, multi-tool and CO2 spacer

Designed and built to remove and install Shimano direct mount chainring lockrings found on XTR 9120, XT 8120, MT900, and other Shimano direct mount systems. Precisely CNC machined from 6061 aluminum for a perfect fit and to prevent marring expensive parts. - Machined flat face for optimal lockring engagement - For lockrings with 41mm outside diameter and 16 notches - 36mm hex drive to be used with Park Tool TWB-36 Crow Foot and a torque wrench to properly measure torque - 6061 aluminum construction

• Threader • Remover • Reamer

The Park FR-3 Freewheel Remover fits SunTour four-notch freewheels. It's built thin so that removing axle parts is unnecessary. And, it's constructed of durable heat-treated steel.

- Makes the installation of hydraulic disc brake calipers quick and easy - Helps properly align a hydraulic disc brake caliper with the rotor - Ensures even spacing between disc brake pads and rotor - Compatible with all styles of hydraulic disc brakes - Durable stainless steel construction

The Park FR-6 Freewheel Remover fits most 4-notch BMX and singlespeed freewheels. It can be held with a wrench or vise and its narrow profile allows use without removal of cones and locknuts.

Engineered for fit, function, and leverage, these L-shaped shop-quality hex wrenches are a must have for every workshop. - High-torque, industrial steel wrenches - Straight hex shaft on the short side, ball end on the long side - Includes 2, 2.5, 3, 4, 5, 6, 8, and 10mm - Comfortable, ergonomically designed nylon handles fit perfectly in your hand - Durable wall/pegboard mount tool holder allows easy access and organization

Park's FR-8 Freewheel Remover fits flip-flop BMX hubs with 30 x 1mm threads. It can be held with a wrench or vise, and its narrow profile allows use without removal of cones and locknuts.

Specialized's MTB XC Box integrates with any SWAT compatible Specialized water bottle cage and SWAT-prepped mountain bike to hold all of the gear need to make fast trailside flat repairs. - Fits one Turbo 29er innertube, SWAT tire lever, CO2 twist head, and 25g CO2 cartridge (not included).

The HCW-16.3 is a combination 15mm pedal wrench and chain whip. Use for both pedal removal/installation and for cassette removal. Chain whip features improved compatibility with 5-speed to 12-speed mountain and road bike cassettes and freewheels. The HCW-16.3 is 10.75" long (27.3cm).

SRAM Bleeding Edge Tool. - Use with Avid or SRAM Pro Bleed Kit

Precision CNC machined aluminum tool for the installation and removal of 12-notch external bearing bottom brackets. Anodized for easy identification and featuring a ratchet/torque wrench compatible 3/8" drive. - 46mm 12-notch OD cup - Race Face® Cinch™, Rotor® BSA30, Zipp® Vuma™, Hawk Racing™ BB3086™, and more

This kit contains all the parts needed for scheduled maintenance and/or rebuild of A2 Stealth Reverb Seatposts. - Includes new, upgraded IFP - Requires RockShox Specialty Tools to perform Service: Oil Height Tool, IFP Height Tool

If you are looking for the absolutely strongest, most bad-ass tire lever, perfect for the toughest downhill and freeride tires, you've come to the right place. Pedro's downhill tire lever features heat-treated tool steel construction for unmatched strength and reliability, 275mm (10.8") length for incredible leverage, a large shovel tip that holds tight on the bead, a smooth curved shape with polished finished to protect tires and rims, and an ergonomic dual density screw driver style handle providing comfort and security. - Heat-treated tool steel construction for unmatched strength - 275mm length for incredible leverage on tough downhill and freeride tires - Large shovel tip holds tight on bead while smooth finish protects tire and rim - Ergonomic handle provides comfort and security

- For removal of Shimano cartridge bottom brackets - Dual compound handle for extra grip and comfort

A purpose-built wrench designed for compression nuts, nipples, and other fittings found on hydraulic brake systems. The five-sided flare wrench head evenly spreads out the force being applied to the wrench, reducing the risk of damage to fasteners and brake hoses. Features a slim, low-profile design to access low-clearance fittings found on hydraulic levers and calipers. Built-in 3/8" fittings allow for use with a torque wrench to achieve proper torque. - Double-sided wrench features 7mm and 8mm wrench openings - Dimensions: 4" x 0.75" x 0.15" (101mm x 19.5mm x 4.5mm) - Weight: 44g (1.55 oz.) NOTE: When using with a torque wrench, the MWF-3 should be installed at a 90° angle from the beam of the wrench.

The DAG-2.2 is an indispensable shop tool that can be used to both measure and straighten misaligned derailleur hangers solving a high percentage of shifting problems. - Gauge bar made of heavy gauge, chrome plated steel - Adjusts to fit 20" to 29"+ wheels - Replaceable threaded tip - Upgraded large inner shaft for added strength* - Tighter tolerances for improved accuracy* - Improved clearance and reach to fit more frame/hanger combos including low clearance thru-axle derailleur hangers* *Compared to DAG-2

Also called a sleeping hub, the Dummy Hub slides into rear dropouts and replaces the rear wheel for chain cleaning and transport. The DH-1 works with all derailleur and 1/8" chain. The unique design allows the bike to be shifted and works with open dropout and thru-axle frames up to 12mm.

12 splines, 22.6mm diameter fits Shimano, Sachs Aris, Sun Race, DNP Epoch, and other 5–10 speed freewheels. The FR-1.3 includes an enlarged thru-hole to accommodate 14mm axles.

- Durable double-ended brush - Ideal for chains, cogs, derailleurs, and chainrings. - Recommended for use with Pedro's cleaner and degreaser products. - Solvent resistant synthetic handle and bristles. - Not recommended for oral use. Pedro's Toothbrush is designed to tackle the drivetrain and is ideal for cleaning chains, cogs, derailleurs, and chainrings. The ergonomic handle is paired with two purpose built brush features. The tapering length bristles up front are designed to scrub the intricate surfaces of chains, chainrings and cassettes while at the opposite end, longer, stiffer, larger-diameter bristles reach deep between the cassette cogs removing even the deepest dirt and grime. The Pedro's Toothbrush can also be a great tool for applying degreaser to drivetrain parts. While holding the Toothbrush flat with the bristles out to the side, pour degreaser to the bristles. Then quickly move the toothbrush to the drivetrain and apply the degreaser using a light scrubbing motion. This technique works especially well with Pedro's Degreaser 13.

Park's AWS-7 features a Y-shaped nylon handle with 4 and 5mm Allen wrenches and a T25 Torx wrench. This convenient 3-in-1 tool keeps commonly used wrenches together and offers an excellent grip as well.

To prevent poor shifting and uneven drivetrain wear, most manufacturers recommend chain replacement at or before 1% stretch. Now you can quickly and accurately determine the wear and stretch of any chain with Park's Chain Checker. Simply insert the Chain Checker’s pins into 2 links, press the swingarm gauge tight, and then check the gauge window for an accurate reading!

Park's Home Mechanic Pedal Wrench is great for your home workshop and event tool box. This top-quality 15mm pedal wrench provides the leverage you need to remove stubborn pedals. It's made to last from heat-treated steel, and the handle has a vinyl grip for comfort.

Thin flange bottom bracket socket designed to create a tight grip on thin flange bottom bracket to avoid slipping while torquing cups into bike frames. This single-sided socket is used for installing and removing 48.5mm, 16-notch bottom bracket cups. The socket has a machined 3/8" drive, which can be used to allow 3/8" drive torque wrenches to be attached and locks onto 1/2 inch unc press rod for secure and easy installation of thin flanged bottom brackets. Machined 6061 aluminum anodized red