Other

Keep the weight down and your headset snug with the Specialzied Carbon Steerer Tube Plug.

• Shim available in various sizes • For use with 25.4mm or 27.2mm seatposts

Sunlite braze-on front derailleur adapter

Thomson Faceplates are compatible only with Thomson stems. Compatible only with X4 stems

Thin, durable clear chainstay protector with extra-strong adhesive. - Overall length - 10.375

Thin, durable clear chainstay protector with extra-strong adhesive. - Overall length - 10.375

Forged AL6061-T6 alloy construction with CNC groove design - Machined insert for even clamping force - For use with carbon seat posts - Ultra-lightweight

This is an FSA Self Extracting Crank Bolt for Hollow Carbon MegaExo Light Cranks - Designed to fit hollow carbon FSA cranks only - Includes M17 bolt, M27 self-extracting cap, and washers

This is an FSA Self-Extracting Left Crank Arm Bolt for Mega Exo ATB Cranks - 30mm long - 14g - Designed to fit FSA ATB cranks only - Includes M18 bolt, M27 self-extracting cap and washers

- Compatible with Shimano, SRAM, Campagnolo and KMC 11 speed chains - DLC Coated - Non-reusable - Opening Tool Required - Card of 2 pairs

- CNC-machined chromoly steel lockrings - 1.29" x 24tpi LH

The Command Post SRL Clamp moves the Command Post's lever into the position where the front shifter would normally go, giving you more control. - Hinge clamp for easy installation. - Lightweight alloy clamp with steel bolt. - Lightweight alloy clamp with steel bolt.

Crank Insurance compatible with HollowGram cranks. Features - Protects HollowGram crank arm from rock strikes - Reflective strip keeps riders visible

FSA bearings that set directly into the frame without the use of pressed in cups. - 36/45 degrees is Cane Creek-compatible - 45/45 degrees is Campagnolo-compatible

This is an FSA MegaExo Crank Arm Bolt for 24mm MegaExo alloy cranks - Designed to fit alloy FSA cranks only - Includes M17 bolt, M27 self-extracting cap, and washers

Origin-8's Pro Force QR Seat Clamp is forged and machined from light and durable aluminum and has an extra-leverage design to hold fast. This fine clamp boasts an anodized finish and a long quick-release lever for excellent clamping force. It also gives you more to hold onto so it's easier to raise/lower your seat.

• Aluminum • CNC-finished

Adapters to convert your rear flat mount frame to post mount caliper - FR1-R140 = rear 140mm rotor - FR2-R160 = rear 160mm rotor - Each includes two 32mm bolts

- AL6061-T6 alloy quick-release seatpost clamp - Stainless steel bushing ensures smooth lever action - Adjustment knob allows for on-the-fly fine-tuning - Rounded edges and floating bolt/ovalized hole design protects carbon frames and seatposts - 28.6mm for 25.4mm seatpost and steel frame - 29.8mm for 27.2mm seatpost and chromoly frame - 31.8mm for 27.2mm seatpost and aluminum frame - 34.9mm for 30.9mm seatpost and aluminum frame, or 31.6mm seatpost and carbon frame - 16mm height

• Converts Braze-on front Derailleurs to clamp on • Lightweight forged alloy • Weight: 28g

• Emergency universal replacement derailleur hanger • CNC machined aluminum construction • Anodized and laser etched finish

These bolts are designed as a direct fit for 30 Tooth x 104 BCD threaded chainring. These are alloy bolts with 4mm hex heads and 10mm length. - Designed for M8 x .75 thread pitch - 10mm long - 4mm hex head - Bolt length is laser engraved onto the bolt head for easy length identification - 6-7 Nm installation torque with light grease on threads only

Bearings for maintaining and rebuilding DT Swiss hubs. - DT Swiss 18307 Bearing

Bearings for maintaining and rebuilding DT Swiss hubs. - DT Swiss 6802 Bearing

Replacement headset bearings from FSA. - Compatible with most Trek MTB integrated headset systems - Sealed bearing for long life - Compatible with Knock Block Headsets

This is an FSA MegaExo Crank Arm Fixing Bolt for MegaExo Cranks. - 26mm length - 12g - Designed to fit FSA cranks only - Includes M18 bolt, M27 self-extracting cap and washers

This is an FSA MegaExo Crank Arm Bolt for 19mm MegaExo alloy cranks - Designed to fit alloy FSA cranks only - Includes M12 bolt, M27 self-extracting cap, and washers

- Type: Headset bearing - Discipline: Road, MTB - Material: Steel - Weight: 26g - Dimension: 1-1/4-inch - Bearing Type: ACB - Angle: 45° x 45°

Disc brake adaptors designed to mate Magura disc brakes with a variety of frame mounts and rotor sizes. - Includes hardware to mount adaptor to frame

- AL6061-T6 alloy seatpost clamp with an integrated adjustable cable guide - Ideal for routing brake and dropper post cables and housing - Chamfered edges and ovalized hole design protects carbon frames and seatposts - 31.8mm for 27.2mm seat posts and 34.9mm for 31.6mm seat posts - 16mm height